Airport Terminal HVAC + Smoke Management — NFPA 415 + NFPA 92 + ASHRAE + ICAO Annex 14

A 45,000 m² Indian Tier-1 airport terminal demands ₹262 Cr MEP capex — ₹78 Cr HVAC, ₹32 Cr smoke control, ₹38 Cr fire, ₹52 Cr LV+UPS+lighting. NFPA 92 axisymmetric plume calc for the 25-m check-in atrium during simultaneous-flight peaks yields 5 MW design fire + 4.2 lakh CMH smoke exhaust — most Indian designs spec 1.5-2 lakh CMH via ACH-based sizing, letting smoke descend in 3-5 min. Three failures we find: under-sized atrium exhaust per axisymmetric plume, BHS basement under-spec for Group A plastics commodity, jet bridge HVAC + sealing missed per NFPA 415 §8.

Airport terminal MEP — the standard stack

Indian Tier-1 airport terminals (T2 Mumbai, T3 Delhi, T2 Bengaluru, KIA, MAA, T1 Hyderabad) follow ASHRAE Standard 161 (Air Quality within Commercial Aircraft Cabins not applicable but indicative for jet bridges), NFPA 415 (Airport Terminal Buildings + Fueling Ramps + Loading Walkways), NFPA 92 (atrium smoke), NBC 2016 Pt 4 §4.3 + Annex F, ICAO Annex 14 Aerodromes, and AAI design guidelines. The terminal is the largest atrium volume + densest occupancy + highest baggage-conveyor fire load of any commercial typology in India.

45,000 m² Indian Tier-1 terminal MEP scope

Three airport terminal MEP failures we keep finding

1. Atrium smoke exhaust under-sized for peak passenger event — NFPA 92 axisymmetric plume calc for check-in hall during simultaneous-flight peak (15-20 simultaneous flights × 300 pax) yields 5 MW design fire. ACH-based sizing gives 1.5-2 lakh CMH; actual demand 4.2 lakh CMH. Smoke layer descends in 3-5 min on a real event.
2. BHS basement sprinkler + smoke under-spec for Class B combustibles — modern baggage with Li-ion batteries + plastic luggage = Group A plastics commodity per NFPA 13. ESFR K=22.4 sprinklers + NFPA 204 smoke vents are required. Designers use standard upright sprinklers + relief vents that fail commodity-classification test.
3. Jet bridge HVAC + sealing missed — NFPA 415 § 8 requires jet bridges to be sealed from terminal smoke + provided with separate HVAC during boarding. Indian designs treat jet bridges as extensions of departure lounge — smoke spreads through jet bridge into aircraft cabin during fire event.